Still doing Snowflakes in Bangles

Still doing Jon Yusoff's snowflakes in bangles. These two are "Radiance" and "Spring Blossom" from her Tatted Snowflake Collection. The thread is Oren Bayan silver metallic thread. I think it's bigger than size 80, but a bit smaller than size 40. 

When I put "Radiance" in the bangle, I found it was a bit too small, so I added rings as I covered the bangle. That was awkward; the bangle kept getting in the way. The holder-rings are obvious and a little twisted. I applied a person-using-thread-that-frays-horribly-when-you-try-to-unpick-it standard: a man on a galloping horse will never notice, so I left 'em. As the thread is fine, instead of the lock chain I usually make for hanging loops, I wrapped a second thread around the bangle at the end and made a pearle-tatted loop. 

These are the latest, but I've got another on the shuttles. I think the stack is about a dozen high now.  It's rather like being stuck in third gear! There are another 40 or 50 bangles in my supply box. Maybe I should save some for another year.

Radiance

Spring Blossom

Starting Over

This blog has been sorely neglected, so has my tatting. The doctor decided I needed exercise more than I needed to sit on my butt and tat. She's right, but it really didn't need to be an either or proposition.

Recently, I took up a Facebook challenge offered by a friend. She will send something to the first five people to comment, sometime during the year -- however, these people have to agree to post, and do the same. So, I'll be getting something from her and will be sending something to three other people (only 3 brave people signed up with me -- either I know people with no inclination to share or nobody wants anything I make). I decided it would be a good time to get out my shuttles and threads and make new things to send. The problem I've been having is that none of my tatting supplies are where I thought they were. Since I haven't finished anything for about a year, I put stuff away safely, and have forgotten the location of "safely." Yes, they should be in the hobby cabinet, or the four dedicated drawers, or the fabric bin, or on the bookshelf, or in the boxes under the bed, or in my tatting tote. Some things are there, some have run off. I can't find my rubber needle pullers anywhere. Trying to sew in the ends and use a rubber band to pull on the needle results in a bent needle. *sigh*

Since it's cold and generally nasty, I'm working on Winter stuff. These are snowflakes inside wrist bangles. Both are designs by Jon Yusoff from her snowflake pattern books. I did have to make the top rings on each point on the red one a bit larger to fit into my bangle. For the green one, I left off the decorative picots on the arching chains. It just worked better for me (it's a counting problem). The bangles are completely covered with tatting, using Jon's method for covering rings.

Yes, the picture appears blurry. It's really just the bad shadows from poor lighting (not that the excuse makes the picture better). 

County Fair

The County Fair was different this year -- like it was only half there. Fewer entries, fewer vendors, fewer animals...you get the idea. The database with previous exhibitor names and addresses was either lost or ignored, so nobody got a postcard reminder of the fair dates and entry times. The Fair was also held earlier than usual, by about a week. Apparently, the people in charge of the exhibitor areas (not animal exhibits) are not the people who have been in charge for the last fifteen years. Those people decided to retire. They apparently either didn't train the new bunch, or the newbies decided they had better ideas. (Nah, I don't think they were really better ideas.) There were no comment cards this year, either. I miss those! It's always good to know where someone thinks your work needs improvement.

Anyway, I entered ten items and received three second place red ribbons:

Konoir edging, Original pattern ornament, Morgan Mouse Bookmarks

and seven first place blue ribbons. 

Renulek's Spring Doily, Original Pattern Doily, Halloween Card, Flowergirl Headband, Time & Again Earrings

Baby Afghan

The little crocheted stuffed animals I made from  the book Edward's Menagerie (#edwardsmenagerie) also got a Judge's Choice ribbon.

Edward's Menagerie Elephant, Zebra, Rhino, and Hippo

State Fair

The State Fair is over and I'm starting on entries for next year.  So far what I have are really ambitious ideas!

I demonstrated tatting at the Bonneville Tatters table in the Home Arts building four times during the Fair:  twice with Tonya, another Bonneville Tatters member, and once with my sister and my niece (and once with Judy, but I don't have a picture with her).  My sister has been tatting for 5 days (not all this year!), and when we went to tat on the last day of the Fair, my niece, who is ten, had been tatting for about 2 hours.  She made a lot of little short chains -- she called them worms.  Some guy asked her what their names were.  She gave him a strange look then said, "Wormy and WormyTwo."  She proudly placed them under the clear plastic cover on our table with all the other tatting bits and bobs.

This is the first year I've entered as "Advanced Amature" -- according to the Fair rules after entering for five years you've got to move up.  I did it a year early because I figured if I was going to enter stuff I'd designed, that had to be advanced.   I entered eleven pieces of tatting and came home with nine first-place blue ribbons and two second-place red ribbons.  It cost me $11 to enter, and I also came home with a check for $31.  Not a high-paying proposition, but certainly a lot of fun.

 The ornaments and the butterfly are the same ones I entered in the County Fair, but I had to add a bookmark tail to the butterfly to enter it in the State Fair.  I added a coil-less safety pin to the back of the Grapes from Karey Soloman's class at Shuttlebirds to qualify it for the wearable (flat) tatting category.


There are more categories in the state than the county, so I made some new things for the State this year.  In the jewelry category I entered a necklace and matching earrings which are really Patti Duff's lanyard pattern with smaller thread and bigger beads.  I found these beads that look like crumpled tinfoil, and really like the way they turned out.    For the Halloween suncatcher, I used the center of Linda Davies' new Classic Doily fitted into a bangle with black thread.  Then with invisible thread (it was 3:00 in the morning on entry day!) I sewed on my Ripley the Ghost made from Jeff's Hamilton's pattern. (Thanks so much for sharing, Jeff!)   It turned out really well (especially for 3:00 in the morning).

The other new things I entered were a Tatted card (I sewed the Celtic motif on a card with invisible thread about 2:30 in the morning), and the swirled square motif I made up a few months ago.  The comment I got on the card was that white on white was not a good idea (lots of things seem like good ideas at 2:30 in the morning), and it was not evenly blocked -- too true.  The comments on the motif were that I pulled some of the rings too tight.  It probably looks a little warped, but second place is still cool.


The Classic Doily by Linda Davies that I test-tatted for her was large enough to enter in the centerpiece category.  It was very well received by the judges -- they like classic and white, and they liked the pattern of this doily.  Thanks, Linda!  I also entered the two-toned purple doily in the "doily" category.  Unfortunately the pretty sunset doily I entered in the County Fair was in the same category as the purple one in the State Fair and it's one entry per category.  I would have entered the other as an edging, but the only edgings categories are for hankies and pillowcases.  (Gotta get working on those for next year).

The lovely Utahraptor got a nice blue ribbon.  I got a note on that one, too.  It said if I'd done a better display it would have been considered for sweepstakes.  Well, rats.  I didn't do this display.  The people who took in entries at the fair pinned it to this board with big "T" pins -- I didn't have any choice in the matter (boy do I sound grumpy and unappreciative and sour-grapeish or what?!).  Anyway, next year I need to make a stegosaurus and put it on a proper display board with invisible thread, not with "T" pins. 



Finally, there's my lone piece of crochet.  I chose the pineapple doily after fussing about it for a while.  Pineapples are my favorites, after all.

There now.  Aren't you glad I'm done blathering?


Oops, not done -- someone asked if there were any categories I didn't enter.  Yes.  I didn't enter the ones with the red "x" on them in this list.  I need to get busy if I'm going to enter in every category next year!

Flurry of Bling

This is the Flurry part -- Jane Eborall's Flurry Snowflake in bangles. It's really a great pattern (and even easier when all done in one color so the SLT can be skipped ... lazy, that's me). It looks wonderful in the bangles -- even if I did have a bit of trouble getting each spoke at 60 degrees from the other. The one done with Lizbeth's red, green and white thread is a bit wild, but I like it anyway.

"So...where does the bling part come in?," you ask with great trepidation. Yup. I did it again. The dollar store yielded up lots of pretty patterned tissue paper. Of course, it's rather seasonal. TA-DA! Holiday Shuttles! And, yes, those are a couple of little Clovers on the right end. I think the Aeros are easier to cover because the paper can be tucked under the sides. It has to be cut with much more precision for the Clovers. I like the striped one on the left side the best, but the minimalist blue snowflakes is a close second.

Ornaments on a Ring

Ruth Perry's Snowflake 2008 is a beautiful Celtic pattern. It's made in one continuous round when done in one color. Of course, I cheated and made it in two colors instead of one, so there were extra threads to hide. Both are made with Lizbeth size 40 thread in Christmas red, Christmas green and white, just combined differently,

At first, I thought I could just do the inside round and fit them inside the ring. That was the right size, but not the right choice. The outer round stabilizes the Celtic twists in the inner round. Without the outer round, the inner lost some of its definition. That's why the outer round sticks out beyond the ring. I like the way they look hanging up -- really they look better than flat (especially against that bright yellow [what ever possessed me to do that?]).

I know, you all thought I was working on my challenge ornaments, right? HA-HA, fooled you! These are not part of my challenge because they are not covers for round ornaments, but they're still going to look good on somebody's tree.

Actually, I have been working on my challenge ornaments, but round doesn't fit in the scanner, you know. I have to haul out the camera (like it's a chore when it's just a point and click digital), and find a good place for the pictures, then get the lighting just right and figure out the macro settings and all that other stuff. I don't have any excuses for not taking the pictures just this reason: lazy, just plain lazy. Maybe tonight. . . [for the pictures! not for anything more exciting!]

Adaptable Cornelia

There! See how adaptable "Cornelia" is! It's just the most amazing pattern. I was playing around with the size 40 red thread after I made the size 20 ornament strap adaptation. It came out as a really nice little heart, so I put it in a ring. I dropped it on the table and it landed upside down. Oh -- wow! A tree, I could see a tree.

The green size 40 and some silver beads made a nice little tree. It needed a trunk, but as I just had a bag of necessities (I was visiting), I didn't have any brown. (Just kidding -- I don't actually own any brown. It's so brown!) I did have a shuttle with some ecru thread on it. Ta-da, a tree with an anemic trunk -- inside a ring of course, I'm making ornaments! And more ornaments. I did two more with little changes, like different bead colors and some different stitch counts.

Guess what happened when I turned the tree upside down? Yup -- an even better heart. I doctored this one so you can see it, too -- but I've not made a nice red one yet.

I think a combination of the second and third one will work out best if I decide to make more (and how can I resist?). Wouldn't these make great presents to fit inside a card? Of course, the post office would probably mangle 'em unless I use a padded envelope. (People who need padded cells ought to have lots of padded envelopes -- but they are sadly lacking in this household).

Ornament Rings

This is a set of winter decorations. I'd use them on the Christmas tree, but they'd do just as well in the window or hanging from the ceiling.

Hanging from the ceiling actually sounds pretty good -- like they've been to a really wild party. YeeeHaaawwwww...party on, dudes. Who's got the music?...

Wait...what was I talking about? Oh, yeah, these ornaments.

All of the white ones are made with Coats Dual Duty Button Cotton. The red and green ones are made with Lizbeth size 40 in Christmas red or Christmas green. All of the white and red ones are either directly from Jon Yusoff's Snowflakes Collection or are adaptations of those patterns to get them to fit into the silver bangles. The green ones are either directly from DMC's Tatting for Today or have been adapted to fit into the bangles. It does seem strange to be making Christmas ornaments in August (given that the temperature outside is upwards of 90 F). These are for a gift. I don't think the person who's getting these even knows this blog exists, though. Sometimes it's a good thing to labor in obscurity, right?

Ring Flake

See, ecru isn't nearly so interesting. Of course, this is a little busy looking, but seen "live" it's really very nice -- not too busy at all (I think it's the shadows in the picture). This is "Midnight Escape" (DMC size 80 ) thread and an (as yet) unnamed snowflake pattern around a covered ring. Once it was done, I decided to practice that covered ring thing some more, so I fastened it to a covered silver bangle. That worked -- so it had to have a hanger. The only problem is that's it's slightly too big for the bangle. I'm going to solve that by drying it over one of my niece's little rubber balls. Right now, it bows out from the bangle anyway, so I'm going to encourage that. I'm going to make more, with a change in stitch counts to see if I can get it to stretch side-to-side without the bow.