County Fair

The County Fair was different this year -- like it was only half there. Fewer entries, fewer vendors, fewer animals...you get the idea. The database with previous exhibitor names and addresses was either lost or ignored, so nobody got a postcard reminder of the fair dates and entry times. The Fair was also held earlier than usual, by about a week. Apparently, the people in charge of the exhibitor areas (not animal exhibits) are not the people who have been in charge for the last fifteen years. Those people decided to retire. They apparently either didn't train the new bunch, or the newbies decided they had better ideas. (Nah, I don't think they were really better ideas.) There were no comment cards this year, either. I miss those! It's always good to know where someone thinks your work needs improvement.

Anyway, I entered ten items and received three second place red ribbons:

Konoir edging, Original pattern ornament, Morgan Mouse Bookmarks

and seven first place blue ribbons. 

Renulek's Spring Doily, Original Pattern Doily, Halloween Card, Flowergirl Headband, Time & Again Earrings

Baby Afghan

The little crocheted stuffed animals I made from  the book Edward's Menagerie (#edwardsmenagerie) also got a Judge's Choice ribbon.

Edward's Menagerie Elephant, Zebra, Rhino, and Hippo

Oops Doily Double Split Chain

Here's that double split chain I was going on about in the last post. This round ends with a ring of 2+2+2, then a chain of 6 ds, a bare thread large enough for 6 more ds, a ring of 2-2+2-2, and another bare thread large enough for 6 ds, then it is joined to the small ring which began this round. (That's the first picture) Then "split chain" stitches are worked back along both bare threads to the point of beginning the next round with a split ring (That's the second picture). Clear as mud, right? 

I really should mention that I do the split chain using Marie Smith's method, which can be seen being worked and explained by Frivole here.

Split chains were NOT my favorite activity until I learned to do them this way.  It makes so much sense and is easier than the method I used to use (sparingly!)

Update on Oops Doily

The pattern is written down to this point, but, like always, I changed it a bit while reworking. The four small rings on top of the large floating rings are attached at the picots. It seems to give the doily more stability and there aren't a lot of weird little picots floating around that will have to be blocked. The split to climb out from the round I haven't started (oh, yes -- that's very clear) is a strange one, so I have to think carefully about how to write it down. It involves leaving a bare thread, doing a ring, leaving another bare thread and making one more ring, then doing "split chain ds" back over the bare threads to get to the next starting point. Except for hiding threads, it would probably be easier to cut and tie. If I remember, when I get to that point I'll take a picture (or scan) and post it.

Oops Doily Explanation

For all of you who can't see the error -- yes, you are right: it is small, not very noticeable, and I made an effort to disguise it when blocking. I could probably give it as a gift and the recipient might not ever notice -- but I think a judge at the fair would have. Anyway, here's a close up:

The circled ring has three picots, just like the corresponding uncircled one, but the first small ring is attached to the middle picot instead of the first picot. When I blocked it I squished the first picot over onto the ring and spread the others apart so it would appear to be the same if it wasn't closely inspected. 

Nit-picking errors isn't something I do all the time, but for something to enter in the fair, I do!

Oops Doily

"Oops" because I really like this one and there's a join into the wrong picot right in the most open, visible part of the doily. This is another see-where-the-shuttle-goes doily made with split rings and chains. It's a pretty good size -- larger than 9 inches -- because it doesn't fit on the scanner. I am about to start a new one to see if I can get the joins right and if I can actually write down the pattern while I'm figuring out what I did. This was my first choice for fair entries -- until I blocked it and discovered the oops. I'll have to report on progress, that might keep me working on it! If it really gets finished I'll photograph it instead of disrespect it enough to just chuck it on the scanner.

Round and Round and Round it Goes

Here's another doily with no pattern. (This is just on the scanner -- and it's too big, but you can get the general idea.) See? It's got the same center as the blue one, but the bigger it got, the more changes I made. Not a very efficient way to create something! The color change allowed for better placement of some elements, but it still got difficult to move from one row to another and started to overlap. I rather like it, but never blocked it because I ran out of the light-colored thread. I think I've ordered more since this one was stuffed in the drawer. I'll have to look and see. If I've got more then I can finish this round. Then if I hunt up some of the dark thread, maybe there's a good starting place for another round there somewhere.

Swirl Bookmark

The thread Marie sent for the shuttle exchange was completely used up making this swirl square bookmark. The Swirl is a pattern I made up more than a year ago. It has more rounds than this one, but I didn't want to use up all the thread before I got the tail made, so I only did three rounds. The tail is pearle tatted. I like doing that because it's a chance to just fiddle with the thread. No rules, and any pattern or non-pattern will do.  OH -- I forgot to say this was also made with my new hand-carved shuttle from Marie.  It really holds a LOT of thread!  It's just the right size for my hand and even though it's smooth, it doesn't slip out of my fingers.  It's lovely!

This one might go to my niece's teacher for Christmas. I offered her one of the Christmas mouse bookmarks, but she's pretty certain her teacher doesn't like mice.

This is also the same motif I used for Diane's doodad challenge. I said then I'd post the pattern. Uh-huh. It's been more than a year, but I do have a .pdf of the file. I've put it in Keep & Share but I only have a trial account, so I hope it works.  If anyone is interested better get it soon.  ☺

*sigh*  It has been pointed out to me that I uploaded the .psp file instead of the .pdf file.  I fixed that, so it should be okay now. Ooookaaayyy--apparently I'm doing something wrong.  I think it's fixed so anyone can download it now.  If someone would try it and leave me a comment if it works, I'd appreciate it.

Blocking is Magic

Okay, it's not magic, but sometimes it's really necessary! Margaret suggested blocking the rumpled mess I posted earlier. I didn't think even blocking would help, and ordinary blocking wouldn't. So...I did not do ordinary blocking. If blocked wet, most of the time cotton thread will stretch without breaking and enough pins will hold chains in unnaturally arched positions to shrink the size of some elements. Yeah, this thing had pins everywhere! I should have taken a picture of the blocking process. I started in the center, and as it stretched, I moved the pins out -- but there were still two boxes of pins in the outer round waiting for this thing to dry. It would not stretch enough in the center to accommodate the too-much-thread elements in the last couple of rounds. I'm wondering if a bit of a steam press will help, but probably won't bother finding out. After seeing it spread out, I don't think it's worth trying to figure out a pattern for the whole thing. I still think the center out to about the five ring arch is worth keeping, so maybe a pattern for that bit would be worth writing down.

Wasted Time

During the time I completely ignored this blog, I was tatting.  I just wasn't accomplishing much.  To start with, here's a blue doily I worked on for quite a while.  It's Lizbeth size 40 thread, and made without cut and tie rounds.  It's all split rings and chains to move from one round to the next.  It's also never been blocked (big surprise, that).  It overlaps itself in several places and I don't think blocking is going to cure it.  After all the time I spent on it, I got it to this point and just cut it off the shuttles and chucked it in the drawer with all the other stuff I don't know what to do with.  I like the center -- most of the stuff I started during the last year has the same center.  All these "oooo better idea" to move on weren't really such better ideas. I think some have potential.  I think is one has potential -- but it might need a few cut and tie places to spread out the work and give the edge room to breathe.  For now, it's going back in the drawer.  ☺  I'm making mice!

State Fair 2013

Covered Lotion Jar

This covered lotion jar is my Creative Arts entry. I got a third place ribbon for it.  Pretty good, since there were lots of things with no ribbons at all. Of course, if one person enters two things in the same category, the judges will only award one ribbon, so that might not mean anything.  I use the jar for a pair of matching shuttles and thread, but entered it as a "trinket jar" home-decor item. They tore a piece on the lid, but when I picked it up after the Fair somebody had glued it down.  Weird. 

Lacy Chevron Afghan

My "Lacy Chevron" afghan got a second place ribbon and a comment on the back that said "nicely done."  This is the second afghan I've entered in the State Fair.  The first one didn't have any constructive comments either, so I decided I didn't need improvement.  :)  


Just so you're not holding your breath, I'm  going to have a brag moment and say everything else I entered got a first place ribbon.  Of course, I have to also say I was the ONLY entrant in the Advanced Department for tatting.  All the other tatting was in either "Amateur," or "Senior Citizens 62 or older."

18-inch crocheted doily

11-inch crocheted doily

This year I mounted all the thread-work I entered. It makes the people at the fair happy because they are easier to display and it makes me happy because they don't get displayed thrown across an afghan or quilt. The pieces are tacked to the boards in two or three spots at the top with invisible thread (so that the judges can lift it up and look at the back if they want to). Both the white crocheted doilies are on pieces of white foam-core board covered with blue cotton fabric. I use stitch-witchery (iron on double stick stuff) to put the fabric on the boards -- much easier than sewing! The nice part is that I can just clip the invisible thread after the fair and store the boards for use next year. Sometimes I don't have a board that looks good with the piece of handwork or I don't have one of the right size for what I want to display, so I have to make new ones.  I have quite a collection of boards now. They are of all different sizes and covered with different fabrics. In the past, I only mounted the smaller pieces, as it was required by the fair so they didn't get lost.

Blue pineapple doily

This is a better picture of the blue tatted "pineapple" doily than the one I got at the County Fair.  This is another of those no-pattern things playing with split chains and rings so I didn't have any threads to hide.  One of these days I should sit down and try to make actual patterns for these.  The problem is figuring out what I did and how many ds I actually used in any element. You'd think I'd be smart enough to write things down as I work, wouldn't you?  Well, hello -- that's 'cause you don't know me very well.  I don't want to waste my time writing down things that might not work -- and I have lots of bits and pieces of things that didn't work!  Still, maybe I'd better stop thinking of it as wasting time and consider it an investment in future patterns, because I like this one!

Sunrise Doily

You recognize this, right?  It's the Sunrise thread and doily center that Jess from Tat-ilicious dyed for me. I entered it in the County Fair in 2012 and intended to enter it in the State Fair that same year. Turned out there wasn't a category for it that year. The only ones they had for edgings were for a pillowcase or a handkerchief. I suppose I could have told them it was a round hanky, but it might have been disqualified.  This year they added some categories (can you believe it!?), so I entered it in the "Miscellaneous Trim Only, on an item not listed above" (the items  listed above were the pillowcase and the handkerchief).
Anyway, the Fair rules allow entry of items completed within the past two years, so -- TA-DA -- I got to enter it this year.  That was cool, because I thought more people needed to see what great things can be done with colored threads! Jess should really get the ribbon for this one, because the judge's comment was, "I like the color choices and the dying of the fabric."

Blue Christmas Ornaments

Blue Christmas ornaments. Yeah, I make a lot of the same ones. The pattern on the right is definitely mine (it's one of the few patterns I've ever written down). The one on the left is one of those I keep making by looking at an old one I have. The problem is, I can't remember where I got that pattern. I don't know if it's one I made up or one I got out of a book, or one I got free off the net. If anyone recognizes it, please let me know!  I suppose I could sit down with all my tatting pattern books and see if I can find it. You can see the problem with that idea, right?  {Open the pattern book ... start looking ...oooooo... that looks interesting ... where're my shuttles? ... thread ... yeah, that color ... what do you mean, "what am I doing?"  I'm going to make something!}

Fantasy Tree

The Fantasy Tree is another piece that had to wait until there was a category for it. There is only one miscellaneous category and in 2012 I used it for the Utahraptor. This year I used it for the Tree.  This is something like a tatting sampler (except there are NO clunies in it -- not one).  I wrapped the shuttles with two colors of Sulky blendables then kept changing the threads here and there, sometimes one thread sometimes both as the shuttles emptied.  I'm really big-headed about this one because on the back of the entry card (judge's comments) it says "Oh MY GOSH. This is an amazing piece" (you can see my head swell, can't you?).  On the front is a notation "sweeps."  It didn't get sweepstakes, but they thought about it. Maybe if I made a tablecloth sized tree...

Snowflakes

Finally, here are the five snowflakes again. I entered them as a set of motifs.  Kind of a sneaky way of getting around choosing which I thought was best.  The card on this one tickled me too -- it says "consider for sweeps". Cool.

So, that's the State Fair for this year for me, at least.  You'll want to see what my niece did though -- really you will! 

And -- one more thing.  It drives me NUTS the way this blogger thing shows me one thing when I enter but when I look on the screen I see something else.  None of the text and pictures are in the right places, so I might just caption all the pictures and the corresponding text.  Yeah, I think I will. --- Aaaaarrrrggghhhh, that's not much better.  You'll just have to figure it out.

County Fair 2013

The County Fair was held at the end of August.  I didn't have very many things to enter because I was busy with other not so fun stuff.  Just to heighten the tension (okay, pretend you were feeling some), here's the crochet first:  First place blue ribbons on a ripple afghan and a small white pineapple doily (which if you look closely you can see they mislabeled.  We entered at the same time and they put my sister's name on it -- she let me keep it anyway).

The other piece of crochet is an 18" (45.75 cm) diameter white pineapple doily.  It not only got a first place blue ribbon, it got a "considered for sweepstakes" high-blue ribbon.  Yeah, I'm pretty pleased with it.

I only entered three tatted items in the County Fair.  The categories are more limited than the State Fair.  I got a first place blue ribbon on the blue doily of my own design. (Well, okay, it was the shuttle's design.  I just loaded the thread and let it take me where it would.)

I entered these snowflakes as "wedding accessories" by claiming they were bride favors. Really, they need to add more categories!  The snowflakes were originally done for the IOLI convention in Salt Lake this year.  Bonneville Tatters (of which I am a member) donated them to the convention attendees.  I turned in somewhere around 40, but got sidetracked with all this other stuff and didn't attend any of the meetings in time to turn in the others.  So...what else?...I entered them in the fair.

The blue Christmas ornaments, which I entered as a set, also got a blue ribbon and considered for sweepstakes.  I know I designed the one on the right, but I'm not too sure about the one on the left.  I've made so many of the one on the right that I'm certain about it, but if anyone recognizes the one on the left as being someone's pattern, I hope you'll say so.  I want to give proper credit -- and I want to make more!  

The rest of the family did well at the County Fair too.  We brought home lots of ribbons. 

State Fair

The State Fair is over and I'm starting on entries for next year.  So far what I have are really ambitious ideas!

I demonstrated tatting at the Bonneville Tatters table in the Home Arts building four times during the Fair:  twice with Tonya, another Bonneville Tatters member, and once with my sister and my niece (and once with Judy, but I don't have a picture with her).  My sister has been tatting for 5 days (not all this year!), and when we went to tat on the last day of the Fair, my niece, who is ten, had been tatting for about 2 hours.  She made a lot of little short chains -- she called them worms.  Some guy asked her what their names were.  She gave him a strange look then said, "Wormy and WormyTwo."  She proudly placed them under the clear plastic cover on our table with all the other tatting bits and bobs.

This is the first year I've entered as "Advanced Amature" -- according to the Fair rules after entering for five years you've got to move up.  I did it a year early because I figured if I was going to enter stuff I'd designed, that had to be advanced.   I entered eleven pieces of tatting and came home with nine first-place blue ribbons and two second-place red ribbons.  It cost me $11 to enter, and I also came home with a check for $31.  Not a high-paying proposition, but certainly a lot of fun.

 The ornaments and the butterfly are the same ones I entered in the County Fair, but I had to add a bookmark tail to the butterfly to enter it in the State Fair.  I added a coil-less safety pin to the back of the Grapes from Karey Soloman's class at Shuttlebirds to qualify it for the wearable (flat) tatting category.


There are more categories in the state than the county, so I made some new things for the State this year.  In the jewelry category I entered a necklace and matching earrings which are really Patti Duff's lanyard pattern with smaller thread and bigger beads.  I found these beads that look like crumpled tinfoil, and really like the way they turned out.    For the Halloween suncatcher, I used the center of Linda Davies' new Classic Doily fitted into a bangle with black thread.  Then with invisible thread (it was 3:00 in the morning on entry day!) I sewed on my Ripley the Ghost made from Jeff's Hamilton's pattern. (Thanks so much for sharing, Jeff!)   It turned out really well (especially for 3:00 in the morning).

The other new things I entered were a Tatted card (I sewed the Celtic motif on a card with invisible thread about 2:30 in the morning), and the swirled square motif I made up a few months ago.  The comment I got on the card was that white on white was not a good idea (lots of things seem like good ideas at 2:30 in the morning), and it was not evenly blocked -- too true.  The comments on the motif were that I pulled some of the rings too tight.  It probably looks a little warped, but second place is still cool.


The Classic Doily by Linda Davies that I test-tatted for her was large enough to enter in the centerpiece category.  It was very well received by the judges -- they like classic and white, and they liked the pattern of this doily.  Thanks, Linda!  I also entered the two-toned purple doily in the "doily" category.  Unfortunately the pretty sunset doily I entered in the County Fair was in the same category as the purple one in the State Fair and it's one entry per category.  I would have entered the other as an edging, but the only edgings categories are for hankies and pillowcases.  (Gotta get working on those for next year).

The lovely Utahraptor got a nice blue ribbon.  I got a note on that one, too.  It said if I'd done a better display it would have been considered for sweepstakes.  Well, rats.  I didn't do this display.  The people who took in entries at the fair pinned it to this board with big "T" pins -- I didn't have any choice in the matter (boy do I sound grumpy and unappreciative and sour-grapeish or what?!).  Anyway, next year I need to make a stegosaurus and put it on a proper display board with invisible thread, not with "T" pins. 



Finally, there's my lone piece of crochet.  I chose the pineapple doily after fussing about it for a while.  Pineapples are my favorites, after all.

There now.  Aren't you glad I'm done blathering?


Oops, not done -- someone asked if there were any categories I didn't enter.  Yes.  I didn't enter the ones with the red "x" on them in this list.  I need to get busy if I'm going to enter in every category next year!

Duded Doodads

Certainly not a pair!  I thought to do something asymmetrical with my Doodads from Diane.  My first thought didn't work out so well.  It's lots of little picot-flowers in metallic thread that I had intended to turn into earrings -- so they looked like flowers growing up one side of the earring.  Well, I couldn't keep track of what I was doing (too many picots! -- because the flowers are a bunch of picots on a ring on top of picots on a chain).  When I was done it just looked like a jumble of thread.   Besides that, no way could I make two look alike.







I made a pendant with the other one, but it looks a little skimpy.  It's the motif I was working on in this post, without it's final round -- there wasn't enough thread on my shuttles for that.  I did add the one ring to use to attach it to a jump ring and a chain.

On top of everything else -- I can't get blogger to add the other picture.  I've tried about six (okay so it was really 14 -- who wants to admit to being that dimly persistent?) times and all that shows up is a little square.  If I look close I think it's giving me a raspberrrrrrry!  I'll try adding it again later.  Maybe I can fool it into thinking I'm somebody else.  I think it's mad at me.  

It likes me again!  You'd think I sent it a present or something...


P.S.  A couple of people have asked about the pattern for the swirled, warped, twisted (whatever) square on the second motif.  I don't have a pattern, but I do have a diagram -- however, right now it only has pencil notes on direction and stitch counts.  Since someone is interested if you'll give me a few days, I'll post the pattern -- with and without the third round. -- I've put it away somewhere safe, so I'm still looking.

Again with the Split Chains

Another bit of a doily from all that split chain practice I've been doing.  As you can see -- I've got a center I really like.  This one has some picots all connected together in the center, which makes it appear a bit ...well... off-center.  It's made with two strands of a blue ombre hand-quilting thread wound together on the shuttles.  This one has been done for a while.  I was going to enter it in the State Fair, but it is an inch over the size for a coaster (5 inches) so I had to choose between this one and the purple one.  I think the purple one looks more finished (even though I can't find the light purple to edge it).  The last time I entered something done with an ombre thread the judges said the color made it look fuzzy or out of focus or something. 

Anyway, my aunt admired this when I was working on it.  I told her she could have it when it was done -- after the fair.  Now that it's not going in the fair, I think I will send it off to her.

Hmmmmm...perhaps I should make some pattern notes first, eh?  This is another that did whatever the shuttles thought they could manage, and I didn't write any of it down.  If I send it away, I'll never be able to make another.

Fair Again

Two colors of purple Lizbeth size 20 thread and Marie Smith's method of doing split chains resulted in this doily:
The center is the same as a number of others I have sitting around the house -- I did a lot of testing on this split chain thing!  I'd get something I rather liked then start over and somewhere along the line think, "Oh, wait, I could change this bit -- that would be better for this round."  Yes, but once one round changed, all the others after it had to as well.  I didn't write down a pattern either.  *sigh* 


I had intended to make another round (of however wide I could get it without breaking the thread ) in the light purple.  I lost the ball of thread.  I looked everywhere I could think of -- though I will admit I didn't look in the fridge or the toilet tank.  (Maybe I'll check those tonight.)  Anyway, being frustrated by the thread I stopped and blocked it.  Must be okay, because it got a blue ribbon and a high blue (considered for sweepstakes) ribbon.  That made me laugh, because I don't like this doily nearly as well as some others I've made, but it is the one that blocked the best! 

More Fair

All these things I entered in the County Fair have been blog-posted during the past year, so I'm sticking them all together here.
The Utahraptor and Fantasy Tree are those I made for the Shuttlebirds convention.  Both got first place blue ribbons, but the Utahraptor also got a "high blue" (considered for sweepstakes) ribbon and a Judge's Choice ribbon.  I'm so vain -- I love getting the big ribbons!

 

The butterfly I made from Anne Bruvold's Christmas hearts got a blue ribbon, too.  These are such perfect little hearts (not bragging on my tatting -- bragging on Anne's pattern!) .  Depending on the categories at the State Fair (have to remember to look!), I might have to put a tail on it and call it a bookmark.  Since I can only enter one thing in each category in the State Fair, I can't put the dinosaur and the butterfly in unless one of them fits somewhere besides "other".

These are seven of the Christmas ornaments I made using Jon Yusoff's snowflake patterns, and some little bits of fillers of one kind or another (one went to the marvelous Jeff).  I entered them as a set and ended up with a sweepstakes ribbon!  It made me laugh, though:  the comment card said "Nice even loops, nice way to display" -- so I got a ribbon for display, or for tatting?  Which ever, I have to thank Jon for such lovely patterns.

County Fair

Fair season is just plain fun.  I like entering my bits and pieces in the fair -- it's the one bit of exhibitionism I engage in (no need to actually show your face in public).  The County Fair is especially fun.   There are no entrance fees, so there are no prizes except ribbons (well, okay, Best of Show gets something else -- this year it was a large glass compote bowl).  Everyone is allowed to enter two things in each category.  I entered two in every tatting category except table runner.  I don't have tables that run.  It's hard to take pictures of the stuff at the fair because they put the tatting in a glass case, or on a table behind the glass case.
I'm showing this one first, because I have to say "Thanks!" again to Jess.  On the judge's card was the comment "Love the colors!"  Yeah, me too.  This is what I did with the Sunset thread and doily Jess dyed:

I made up the edging based on all the other split chain pieces I've been experimenting with for a month or so.  It looked a little odd stuck out there on the edge, so I wound some size 40 peach colored thread, onto a bent paper clip for a shuttle and did the little short arches woven in and out of the edging legs (as if that makes sense).  I also used the peach thread to make another round on the edging (there wouldn't have been enough of the Sunset to do another edging round).  It turned out icky looking so I cut it off.  I'm glad I didn't use the rest of the Sunset after all.  That would have been such a waste.  This one is going back in my tatting drawer until time for entries in the State Fair -- I have confidence in it, because the colors are beautiful.

Speaking of Split Chains

You can't imagine the delight I felt in figuring out this split chain thing.  I could do them, but I didn't like it -- and only knew one way to make it work so sometimes half my chain was front side and the other half was back side (weird looking). 
I sat down with a shuttle and a bit of left-over thread and made this string of stuff all hooked together with split chains.  Then I hunted up a couple of other shuttles with more left-over thread and made this interesting little motif.  I was disgusted to run out of thread and not be able to find the ball of thread to add more (that pink and blue stuff is here somewhere!). 
Next, I wound on two colors of Sulky and started again.  I did more rows than the first one, but it lost it's definition and started to look very cramped.  I ran out of thread then. Very likely a good thing, because I'd tatted myself into a corner, so to speak, and the rounds were not ending in good places to start a new one.
Somewhere around here is another start but with changes which have, so far, left a bit more defined negative space.  I'll post that another time.  Maybe I could actually write down a pattern instead of just going around and around where ever the shuttles feel like going.  Nah, prob'ly not.  Hmmm...but maybe that second incarnation, as a single motif, would be possible.

Shuttlebirds Fun!

Yeah, it really was.   It would be more fun if it was longer and I got to take more classes.  It's great to learn things -- either a new technique or an old one used a new way or just a really nifty pattern.  The people in Spokane really know how to put together an event.  I know it was a lot of work behind the scenes, but everything ran so smoothly from my perspective -- they made it look easy.  Thanks so much for all your hard work, you Shuttlebirds!

The Retro-tat was fun.  I wasn't signed up, but someone that was couldn't be there, so there was an extra piece to undo.  I'm slower than seven-years-itch, but everyone was slow compared to Jessica!  I didn't do the Tat-off.  I like to stop and admire what I'm doing and stretch my fingers too much.   In other words, I'm a slow tatter.  These are some of the people participating -- they can chat and tat and still work fast. 

This year's theme was "Tatting on the Wild Side" and there were a lot of really great entries in the theme contest.  They had four categories: Animal/Original, Animal/Published, Color/Original, and Color/Published.  Everyone was allowed to enter two things in each category.  No everyone did that -- but I did, however, I only made two new pieces for the contest.  Everything else I entered was something that's already been posted here.

I was most pleased with my Utahraptor.  I found a picture on the 'net and put it under a piece of tracing paper then made some rings and chains and split rings and SCMR and stuff like that on top of the picture.  I tatted it about half way around -- well, up to the neck.  By that time, I was back home (I started while visiting my dad), so I scanned the picture to the computer and drew what I had done to that point on top of the picture with PaintShop.  I tatted it again -- all the way to the back leg.  Then I drew some more.  Next I tatted the whole thing and decided it was what I wanted, but I was using ecru cebelia thread.  Well, ick.  But, it worked and was made in one continuous round -- except where I had to add thread -- there were only two ends to hide at the end of the tail.  Finally, I tatted the whole thing in a nice dinosaur-ish green size 20 Häkelgarn, and this is what it looked like on the display table.  There now, isn't he charming?  (Okay, I'm through bragging for a minute.)

The winning entry for the Animal/Original category was Jean Reeves "Wild Thang".  Can you imagine a baby shuttle-eating monster?  She did!  That was the cutest baby monster I ever did see.  He was all covered in green scales with big black eyes and sharp teeth -- his rose ended tongue made him a little less scary.  :)
Tucked inside the tatted clasp purse was a little white shuttle.  Little monster -- he ate it!

Delsey Howard won the Animal/Published category with her Peacock.  The colors she chose were perfect and her tatting was so nicely done.  I'm just tickled that I've purchased the same book she got it from, so I can try it myself.  I just hope I can do it justice, like she did.  It was absolutely beautiful -- and I thought the peacock looked happy.  Happy tatting is good.

Sherry Pence's interpretation of Jane Eborall's Patchwork took top honors for Color/Published.  Such a pretty thing, and the colors she used are perfect together.
I took a class from Sherry, and she's not only a wonderful tatter, she's a really nice, funny, person and a very patient teacher!  That mock hairpin lace very nearly wrapped my brain around a corner, but she persevered and we all got it.  I've got a finished piece to show for it -- but it's not nearly so nice as Sherry's.  I'm going to try it again, 'cause I think I've got it.  Once I get pictures of the stuff from the classes I took, I'll post those and tell you again what a good teacher she is!

Oh, yeah, and I won, too!  (This is the more of the braggy part, so you can skip it if you want to.)  I got the prize for Color/Original for this "Fantasy Tree".  That's the good name for it, my niece calls it a "blobby tree" -- that doesn't sound as good.  I was fussing about getting my entry done when I was working on the dinosaur, because I did unpick and change and unpick and rework until I wondered if I would ever get it figured out.  Patti left me a comment and said just do a free-form piece, then there's nothing to unpick!  Okay.  That's the tree.  I started with a ring not quite in the center and just kept going.  I changed threads here and there -- this is all Sulky blendables with two strands wound on the shuttle at the same time, but not always the same two.  Again, I got to the end and just had two tails to hide because everything else was hidden when I changed threads.  So it goes around and around and back and forth and up and down...


I've got more to say about the Shuttlebirds Workshop, but not right now!